เครื่องวัดไฟฟ้าสถิตย์ ป้องกันไม่ให้เกิดความผิดพลาดกับบุคคลและอุปกรณ์อิเล็กทรอนิคส์

Portable Static Level Meter, easily measured anywhere with Rotating Sensor Head.

Rotating Sensor Head enables you to read the measurement value easily at any pointing angle.

• Rotates 180 degree by 45 degree increments

Two modes for measuring electric potential:

• Electric Potential Measurement
Momentary and peak value of static electric potential.
Human body static electric potential, which can be measured hard in general, can be easily measured with Option Charging Level Measurement Plate for Body attached to the unit.

* Measurement for the charged object.
* Measurement value can be hold temporarily by pressing Hold Button.
• Ion Balance Measurement for Ionization Equipment HAKKO FE-510 etc.
* Ion balance of the object cannot be measured.

The unit of measurement value on display is ‘kV’.

If the result of measurement is 10V, the value on display shows ‘0.01kV’ in case of static electric potential. If the result of measurement is 1V, the value on display shows ‘0.001kV’ in case of ion balance.

The distance between the sensor and the charged object should be 30mm.

Easily adjusts the distance by Red LED mark pointing at the charged object.

Adjusts Zero Point easily with just a single touch of a button.

Battery indicator informs you the replacement timing of battery.

When the battery charge icon shows one unit left on display, replace the battery.

NOTE If you do not intend to use this device for an extended length of time, remove the battery.

Model	Packing List
FG-450	HAKKO FG-450 (With carrying case), Grounding wire, Strap, 006P type 9V dry cell battery (For trial), Ion Balance Plate (With screw). Instruction Manual

Model No.	FG-450
Power supply	006P 9V dry battery
Measurable potential range	Normal mode : 0.00 to ±19.99kV (resolution : 0.01kV)  Ion balance mode : 0.000 to ±1.999kV (resolution : 0.001kV)
Signal detection method	Oscillating chopper method
Display refresh frequency	0.5seconds
Measurement precision	±10% of reading ±2 digit
Continuous operating limit	Approx. 10hour (with alkaline battery)
Measurement distance	30mm (between object being measured and sensor)
Measurement distance adjustment	Red LED beam focusing method
Sensor head rotation angle	180º (in increments of 45º)
Display	LCD display with built-in backlight
Polarity display	Positive polarity/negative polarity display
Mode switching	Ion balance/static electricity measurement modes
Battery check	Remaining charge displayed in display panel
Operating environment	0 to 40ºC, 20 to 70%RH (without condensation)
Dimensions	68(W)× 138(H)× 22(D)mm
Weight	160g

* Weight (including battery)