เครื่องวัดอุณหภูมิ มีการออกแบบที่กะทัดรัดช่วยประหยัด พื้นที่ทำงาน เซ็นเซอร์เหมาะกับการเกิดปฏิกิริยาอุณหภูมิสูง

Automatic measurement to standardize the process
Minimize individual differences in how to complete measurement and read result.

Automatic temperature measurement：AUTO HOLD Function

The measurement will end automatically when tip temperature is stabilized.
The measurement process will be the same no matter who does it.

Constant display of measured max. temperature：MAX HOLD Function

Max measured tip temperature will be displayed.
This function can be useful for quality control of components and P.W.B..

Temperature Sending Function

Measurement result by AUTO HOLD function or MAX HOLD function can be sent to a soldering station (FN-1010) through infrared.
This function can eliminate manual process of recording results, the time for the process, and human error.
* Image photo below
AUTO HOLD function and MAX HOLD function cannot be used at the same time.

Temperature Measurement Count Function

Number of tip temperature measurement will be automatically counted.
This function can be useful for control of changing sensor.

Auto Shutoff Function

The power will automatically be shut off after 3 minutes of no use.
It can save battery power and time for changing battery..

Fine sensor can deliver accurate measurements.

・Suitable for Lead-Free Solder
・Disposable sensor always maintains accurate temperature measurment
(Replace sensor when the measuring point underwent degradation)

Dimensional Measurement

Allows you to measure from any desired direction according to tip shape

Several ways of measurement can be possible with temperature probes. (Option)

Model	Packing List
HAKKO FG-100B	Unit, 006P 9 V dry battery (for trial), Sensor (qty 10 ), Instruction manual

Model No.	FG-100B
Power supply	006P 9V dry battery (alkaline sell recommended)
Temperature resolution	1ºC
Temperature measurement range	0-700ºC
Temperature precision	±3ºC (300 to 600ºC) ±5ºC (other than above)
Temperature sensor	K (CA)type thermocouple
Display	LCD : 3 1/2digits Besides measured temperatures,display indications include the following: - Battery low alarm - Burnout alarm - MAX HOLD : 'MAX HOLD' is displayed at the lower right of the LCD.
Operating environment	Ambient temperature/humidity range : 0 to 40ºC, 20 to 90%RH (without condensation)
Environmental conditions	Applicable rated pollution degree 2 (according to IEC/UL 61010-1)
Dimensions	68(W)× 140(H)× 38(D)mm
Weight	125g

* Dimensions : excluding protrusions
* Weight (excludeing battery)

HAKKO FG-100B Display Example