*** Brochure -->
Click
*** Parts List -->
Click
Infrared halogen lamps provide powerful support for insufficient heat when reworking and mounting post-production add-ons
Sensor
function for more accurate temperature control.
All the functions you've ever wanted in a single package.
Features ::
1. Entire work surface heats
rapidly for instant use and improved efficiency
Six halogen lamp heaters let you preheat the whole board in next to no
time after turning the power on. Full-board heating and quick
temperature ramping let you get the job done quickly when reworking or
mounting post-production components to multilayer substrates that
require greater thermal capacity. As it does not contaminate the air,
the HAKKO FR-870 also offers powerful support for a clean workplace
environment in industrial applications.
2. Non-contact
system can be used with double-sided boards
Non-contact system allows preheating of double-sided boards, which hot
plates cannot handle.
3. Set thermal profiles
Auto mode step-heating method (maximum of three steps/step 1E) heats
PWBs slowly and evenly, letting you transmit 100% of the heat energy
from a rework system and soldering iron. You'll never be forced to work
with a higher set temperature due to insufficient heat again.
Power mode lets you control heater output using settings from 0% to 100%.
Once the temperature of the sensor attached to the board reaches the set temperature, the heater is on-off controlled so that the board temperature can be maintained at the set temperature.
Auto Mode
Auto mode provides three steps (Step 1-3) to create an optimal heating
profile for the work in question, letting all operators consistently
produce work of the same quality. Programs can be set for ten channels
in each mode.
4. Board attachment system facilitates
continuous work
Once a PWB is positioned, boards of the same dimensions can
be removed or attached in a single motion.
This design greatly facilitates continuous work.
 |
  |
|
Adjust screws to board
width |
Boards are hot after operation and must be handled with care. |
|
5. Convenient design for easy everyday maintenance The reflector plate can be removed by simply removing the four screws on the base of the unit. This simple design makes it easy to clean flux and components that have dropped onto the reflector plate. |
|
Specifications ::
Packing List ::
|
Power Consumption |
100V -
460W 110V - 520W 120V - 600W 220V - 470W 230V - 500W |
| Operation modes | Power
mode, T/C mode Power auto mode, T/C auto mode |
| Setting range | Power
mode : 0-100% T/C mode : 50-200C Set time : 0-999 s |
| Heating element | Halogen lamp |
|
Effective heated area |
190(W) x 80(D) mm |
|
Heater area dimensions |
248(W) x 140(D) mm |
|
Work grid partitions |
2 |
|
Temperature sensor |
K-type thermocouple |
| Dimensions | 290(W) x 100(H) x 308(D) mm |
| Weight | 3.4 kg |
| Lamp lifetime | 2,000 hr* |
| Lamp control | Power
mode : Percentage-based system T/C mode : PID control |
| External inputs | Start signal input possible |
| HAKKO
FR-870 Preheater
Preheater unit, thermocouple (type K), power cord,
|
||||||||
| Replacement Parts :: | ||||||||
|
